To attach your gas cylinder follow these easy steps:
1. Remove the drip tray and lay the machine down on its side.
2. Unscrew the plastic sealing from the cylinder top.
3. Carefully insert the gas cylinder through the hole at the bottom. Don’t drop the cylinder into the hole.
4. When you feel that it reaches the bottom, begin screwing the cylinder clockwise until it is fastened. Don’t screw too hard since this might break the threads holding the gas cylinder in place.
You should be good to Sparkle.
To replace the gas cylinder do the opposite ie.:
1. Remove the drip tray and lay the machine down on its side.
2. Unscrew the gas cylinder anti-clockwise until it comes out.
3. Put a replacement one in as above.
