The ultimate set with everything you’ll need to transform your knife from blunt to sharp!
Included in this set
- 1x Carry case with sharpening station and water bath
- 1x Corundum Whetstone 400/1000 Grit
- 1x Corundum Whetstone 300/8000 Grit
- 1x Large knife sharpening angle guide
- 1x Small knife sharpening angle guide
- 1x Diamond stone flattener
Whetstone dimensions: 21 x 7 x 2.8cm
Stone Grits & Use Choose one of the available grits, depending on the condition of your knife
- Coarse 400 Grit: Used to repair badly damaged or extremely blunt knives or tools
- Medium 1000 Grit: This is the main sharpening grit and is used to re-sharpen and remove burrs
- Fine 3000 Grit:Â Used for fine sharpening and removal of burrs – smoothens the knife-edge
- Extra fine 8000 Grit:Â Used for polishing the knife-edge, can remove most burrs

Use & Care:
- Do not use the whetstone to sharpen serrated blades or scissors.
- To avoid knife damage, sharpen by employing light pressure.
- Use the entire surface of the stone to maintain evenness during sharpening
- Avoid letting the whetstone fall or other similar impacts. Being associated to the use of knives, keep the whetstone out of the reach of children.
Use Instructions:
- Submerge the whetstone in water for approximately 5 minutes or until bubbles have stopped. This process must always be repeated before sharpening.
- Place the whetstone on the non-slip stone station base. Before commencing with the sharpening process, use the flattening stone provided to ensure the whetstone is completely flat – this is very important! Always ensure to keep the stone wet while sharpening and do not remove the powder build-up as this helps sharpen the knife.
- Using the guide rails included, move the blade using a back and forth motion on a 15°-30° angle, ensuring to keep even pressure on the blade.
- Once a burr is reached on the edge of the entire blade, change sides and repeat the process 4/5 times each side until the burr is completely removed and the blade is razor-sharp.
- After use, clean the surface of the whetstone and leave it to dry before storing it in the stone station.
Customers' review
5 stars
0
0 %
4 stars
0
0 %
3 stars
0
0 %
2 stars
0
0 %
1 star
0
0 %
Only logged in customers who have purchased this product may write a review.